Springfield Armory 3.3 XD-S Safety Recall

Springfield Armory has issued a safety recall for the XD-S click on the following links for additional Info…

http://boomboomtactical.com/xds01.pdf

http://boomboomtactical.com/xds02.pdf

Smith & Wesson Issues a Safety Alert for M&P Shield Pistols

Smith & Wesson issues safety alert for M&P Shield pistols

http://www.smith-wesson.com/webapp/wcs/stores/servlet/Category4
_750001_750051_791654_-1_757978_757978_image

Click on the following link to Read more:

http://dailycaller.com/2013/08/23/smith-wesson-issues-safety-alert-for-mp-shield-pistols/#ixzz2cp7gUWt8

August Gunsmith Specials

OK it is August 10th already and I haven’t come up with an August Special any suggestions?

UPDATE AUGUST GUNSMITH SPECIAL

***Glock Trigger Jobs normally start at $75.00 so from now until August 31st all Glock trigger jobs will start at $60.00***

Boom Boom’s July Specials

Boom Boom Tactical July Specials (good through July 31st)

S&W J Frame revolver ready for trigger work


Reduce the trigger pull of your S&W J Frame Revolver

Gunsmith Special – Smith & Wesson J Frame Revolver Duty Carry trigger job includes Apex Tactical kit, stoning and polishing all for $95.00 (usually $135.00) For hammer and trigger shims add $12.00

Sight Removal and Install
*Sight removal and install $30.00 (normally $45.00), good for any Glock, Sig Sauer, Smith and Wesson M&P and Springfield Armory XD

FrogLube CLP

XDS in Parts

Disassembled Springfield XDS heated and lubed. (click on picture for larger view)

Boom Boom Tactical is now offering Frog Lube firearm coating. We will disassemble your firearm, clean it, heat it up and apply the frog lube. After it has set for about an hour we wipe the parts off and re-assemble the firearm to find out more about frog lube check out this link http://www.froglube.com/FL13/FAQ.htm.  We charge $60.00 for the work listed above and we provide the frog lube.

Springfield Armory XDS

This is the finished product the Springfield XDS after FrogLube application. (click on picture for larger view)

This Weeks Projects

Glock 23

I have been doing some stippling work this week and figured I would post a couple of the finished projects. The first image is a Glock 23. It had a partial grip reduction with a 360 degree stipple we also cut tactical magazine cut-outs and stippled the slide cover plate to match the grip. The slide was refinished in a tactical grey baked on Cerakote finish. The owner plans on carrying this Glock and decided to stick with all stock Glock internal parts. You can click on the image for a larger view.

M&P 9

The second image is a Smith & Wesson M&P 9. On this M&P we added a fibre optic front sight, stippled indexing points, stippled the front strap, stippled the back strap and slide plate and we also reduced the area around the magazine release. We also raised the trigger guard slightly at the front strap and smoothed for comfort. You can click on the image for a larger view.

Cerakote Firearms Coatings

Hey All, hope everyone had a great new year’s. I just want to let everybody know that we will be offering Cerakote as a firearm finish. We will be doing the application in-house which means a pretty quick turnaround time. You will have a choice of either air dry or baked on with too many colors to mention. We should be able to do everything from a Glock slide to a Remington shotgun. I hope to have everything up and running (full production) by May of this year. If you have any questions feel free to give me a call or send me an e-mail.

For more info on Cerakote check out http://www.cerakoteguncoatings.com/

Boom Boom

Boom Boom Holiday Special

Boom Boom December specials (December 1st through 31st, 2012) 10% off labor on any AR-15 or AR-10 related repairs or add ons. Feel free to contact me if you have any questions or need any further info Happy Holidays from Boom Boom Tactical

 

Ghost Ultimate Trigger Connector

Ghost Ultimate Trigger Connector

I have lost count the number of trigger jobs I have done on the Glock’s. I would say my favorite trigger connector to use in my trigger jobs, other than the factory 3.5 lb connector would be the Ghost Ultimate. You can tell it is a quality piece by its looks alone although I still polish and de bur it before it is installed. The self cleaning groove is great for the shooter who doesn’t completely disassemble their trigger housing when cleaning and it really does seem to smooth out the pull. It gives you a better trigger reset that you can both feel and hear. I have yet to have a problem with any ghost connector which is more than I can say for some of the other brands. So if you’re looking for a good 3.5 lb connector you can’t miss with the Ghost Ultimate. Remember you can click on the image for a larger view.

The difference between a Remington 870 Express vs Remington 870 Police

Modified Remington 870 express

I am often asked the difference between a Remington 870 express home defense shotgun and The Remington 870 police shotgun. Other than the higher end milled receiver and aluminum trigger plate assembly it is pretty easy to bring your 870 express up to par with an 870 Police. I have a small kit that consists of ; a heavier sear spring, heavier carrier dog follower spring, machined extractor and a heavier duty magazine follower spring and follower. Listed below are some of the differences between the two shotguns. Continue reading